Senring OEM Pneumatic Slip Ring Hole 70mm OD 140mm
Through Bore Slip Ring Hole Size 70mm OD 140mm Can Stably Transmit 2~36 Circuits Description of H70140 Through Bore Slip Ring The H70140 series is a standard aperture conductive slip ring with a 70mm
- Brand
- YUMO
- Place of Origin
- China
Through Bore Slip Ring Hole Size 70mm OD 140mm Can Stably Transmit 2~36 Circuits
Description of H70140 Through Bore Slip Ring
The H70140 series is a standard aperture conductive slip ring with a 70mm aperture (suitable for any rotating device with a diameter of ≤70mm) and an outer diameter of 140mm. It can stably transmit 2 to 48 channels of current or signal and can be used for any device that requires 360° rotation for conducting or transmitting various signals.
Technical Specification of H70140 Through Bore Slip Ring
| Mechanicall parameters | |
| Working Life | refer to slip ring grade table |
| Rotating speed | refer to slip ring grade table |
| Working Temp. | -30°C~80°C |
| Work Humidity | 0~85% RH |
| Contact Material | refer to slip ring grade table |
| Housing Material | AL alloy |
| Torque | 0.05N.m+0.02N.m/6 wire |
| IP Grade | IP51 |
| Electrical parameters | ||
| Spec. | Power | Signal |
| Voltage Range | 0~690VAC/VDC | 0~440VAC/VDC |
| Insolution Resistance | ≥1000MΩ/500VDC | ≥1000MΩ/500VDC |
| Lead wire Spec. | AWG17# Silver-plated teflon | AWG22# Silver-plated teflon |
| lead wire length | standard length 300mm(can be customized) | |
| Dielectric Strength | 800VAC@50Hz,60s | |
| Electrical Noise | < 0.01Ω | |