OEM Customized Through Bore Slip Ring Hole Size 50mm
OEM Manufacturer Quick Customized Through Bore Slip Ring Hole Size: 50mm Description of H50119 Through Bore Slip Ring H50119F series is a standard aperture conductive slip ring with a 50mm aperture (s
- Brand
- YUMO
- Place of Origin
- China
OEM Manufacturer Quick Customized Through Bore Slip Ring Hole Size: 50mm
Description of H50119 Through Bore Slip Ring
H50119F series is a standard aperture conductive slip ring with a 50mm aperture (suitable for any rotating device with a diameter of ≤50mm) and an outer diameter of 119mm. It can stably transmit 2 to 48 channels of current or signal and can be used for any device that requires 360° rotation for conducting or transmitting various signals.
Small, medium and large slip rings with hollow shaft and high-quality bearing technology for long service life and high rotation speeds. Standardised and modularised design.Combined power and signal versions possible.
What is the advantage of slip ring?
Speeds can be adjusted in the case of slip ring (wound rotor) by inserting an resistance. Hence slip ring motors are considered as variable speed motors. Slip ring motors have high over loading capacity, smooth acceleration under heavy loads, and no abnormal heating during starting.
Technical Specification of H50119 Through Bore Slip Ring
Mechanical parameters | |
Working Life | refer to slip ring grade table |
Rotating speed | refer to slip ring grade table |
Working Temp. | -30°C~80°C |
Work Humidity | 0~85% RH |
Contact Material | refer to slip ring grade table |
Housing Material | AL alloy |
Torque | 0.05N.m+0.02N.m/6 wire |
IP Grade | IP51 |
Electrical parameters | ||
Spec. | Power | Signal |
Voltage Range | 0~690VAC/VDC | 0~440VAC/VDC |
Insolution Resistance | ≥1000MΩ/500VDC | ≥1000MΩ/500VDC |
Lead wire Spec. | AWG17# Silver-plated teflon | AWG22# Silver-plated teflon |
lead wire length | standard length 300mm(can be customized) | |
Dielectric Strength | 800VAC@50Hz,60s | |
Electrical Noise | < 0.01Ω |