Hole 50mm OD 119mm Small Slip Ring Electrical Connector
Rotor Flange Installation Through Bore Slip Ring Hole Size 50mm OD 119mm Description of H50119f Through Bore Slip Ring H50119F series is standard through the hole slip ring, rotor Flange installation,
- Brand
- YUMO
- Place of Origin
- China
Rotor Flange Installation Through Bore Slip Ring Hole Size 50mm OD 119mm
Description of H50119f Through Bore Slip Ring
H50119F series is standard through the hole slip ring, rotor Flange installation, hole size 50mm(suitable for shaft ≤50mm), OD 119mm. It can stably transmit 2~36 circuits power@10A or 2~108 circuits signal@2A and applied to any devices where requires to transmit
What is a Through Bore Slip Ring?
Through Bore Slip Rings can be drum or pancake-style designs that are highly customized for the application. The variety of hollow shaft dimensions is vast, ranging from very narrow to more than 1,000 mm. Through Bore Slip Rings can support signal and/or power transmission. They integrate bearings and provide low torque. The capacity to interface with the host systemis a key requirement.
Technical Specification of H50119f Through Bore Slip Ring
| Mechanical parameters | |
| Working Life | refer to slip ring grade table |
| Rotating speed | refer to slip ring grade table |
| Working Temp. | -30°C~80°C |
| Work Humidity | 0~85% RH |
| Contact Material | refer to slip ring grade table |
| Housing Material | AL alloy |
| Torque | 0.05N.m+0.02N.m/6 wire |
| IP Grade | IP51 |
| Electrical parameters | ||
| Spec. | Power | Signal |
| Voltage Range | 0~690VAC/VDC | 0~440VAC/VDC |
| Insolution Resistance | ≥1000MΩ/500VDC | ≥1000MΩ/500VDC |
| Lead wire Spec. | AWG17# Silver-plated teflon | AWG22# Silver-plated teflon |
| lead wire length | standard length 300mm(can be customized) | |
| Dielectric Strength | 800VAC@50Hz,60s | |
| Electrical Noise | < 0.01Ω | |