High Power 120V Through Bore Slip Ring OEM

Through Bore Slip Ring Hole Size Suitable For Shaft ≤50mm Can Stably Transmit 2~36 Circuits Description of H50119 Through Bore Slip Ring H50119F series is a standard aperture conductive slip ring with

Brand
YUMO
Place of Origin
China

Through Bore Slip Ring Hole Size Suitable For Shaft ≤50mm Can Stably Transmit 2~36 Circuits

Description of H50119 Through Bore Slip Ring

H50119F series is a standard aperture conductive slip ring with a 50mm aperture (suitable for any rotating device with a diameter of ≤50mm) and an outer diameter of 119mm. It can stably transmit 2 to 48 channels of current or signal and can be used for any device that requires 360° rotation for conducting or transmitting various signals.

Small, medium and large slip rings with hollow shaft and high-quality bearing technology for long service life and high rotation speeds. Standardised and modularised design.Combined power and signal versions possible.

What is the advantage of slip ring?

Speeds can be adjusted in the case of slip ring (wound rotor) by inserting an resistance. Hence slip ring motors are considered as variable speed motors. Slip ring motors have high over loading capacity, smooth acceleration under heavy loads, and no abnormal heating during starting.

Technical Specification of H50119 Through Bore Slip Ring

Mechanical parameters
Working Life refer to slip ring grade table
Rotating speed refer to slip ring grade table
Working Temp. -30°C~80°C
Work Humidity 0~85% RH
Contact Material refer to slip ring grade table
Housing Material AL alloy
Torque 0.05N.m+0.02N.m/6 wire
IP Grade IP51
Electrical parameters
Spec. Power Signal
Voltage Range 0~690VAC/VDC 0~440VAC/VDC
Insolution Resistance ≥1000MΩ/500VDC ≥1000MΩ/500VDC
Lead wire Spec. AWG17# Silver-plated teflon AWG22# Silver-plated teflon
lead wire length standard length 300mm(can be customized)
Dielectric Strength 800VAC@50Hz,60s
Electrical Noise < 0.01Ω